When the laser cutting machine is working, if it breaks down, it is very dangerous. The novice must be trained by professional personnel to operate independently. According to the experience, 13 details of the safety work of the laser cutting machine are summarized
1. Observe the safety operation regulations of general cutter. Start the laser in strict accordance with the laser start-up procedure.
2. The operator must be trained, familiar with the structure and performance of the equipment, and master the relevant knowledge of the operating system.
3. Wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam.
4. Do not process a material before it is clear whether it can be irradiated or heated by laser, so as to avoid the potential danger of smoke and steam.
5. When the equipment is started, the operator shall not leave the post or be entrusted to be managed without permission. If it is really necessary to leave, the operator shall shut down or cut off the power switch.
6. Put the Fire Extinguisher in the accessible place; turn off the laser or light switch when not processing; do not place paper, cloth or other inflammables near the unprotected laser beam.
7. If any abnormality is found during the processing, the machine shall be shut down immediately, and the fault shall be eliminated in time or reported to the competent personnel.
8. Keep the laser, bed and surrounding areas clean, orderly and free of oil pollution, and stack the workpieces, plates and wastes as required.
9. When using gas cylinder, avoid crushing the welding wire to avoid leakage accident. The use and transportation of gas cylinders shall comply with the supervision regulations of gas cylinders. Cylinders shall not be exposed to the sun or near the heat source. When opening the bottle valve, the operator must stand at the side of the bottle mouth.
10. High pressure safety regulations shall be observed during maintenance. Every 40 hours of operation or weekly maintenance, every 1000 hours of operation or every six months of maintenance shall be carried out in accordance with the regulations and procedures.
11. After starting the machine, start the machine manually at low speed in X and Y directions, and check whether there is any abnormality.
12. After inputting the new workpiece program, it is necessary to test run it first and check its operation.
13. When working, pay attention to observe the operation of the machine tool, so as to avoid accidents caused by the cutting machine going out of the effective travel range or collision between two machines.
Wuxi huaoulai automation equipment Co., Ltd
Wuxi huaoulai automation equipment Co., Ltd. is a designated second-hand equipment dealer authorized by Baicao (Shanghai). Located in Wuxi, China, the beautiful hometown of fish and rice, the company mainly provides the sales and maintenance of second-hand laser equipment and spare parts. It is a technical enterprise focusing on the sales, upgrading, transformation, repair, maintenance and sales of spare parts of laser cutting machines. It has many Deposition of laser cutting machine technology. Since its establishment, Hua Ou has provided hundreds of enterprises with professional laser equipment solutions and technical support, and won the general recognition and praise of customers. We will take the good faith as this, provides the high quality service wholeheartedly for you, welcome the new old customer to call the consultation!
- Company Name: Wuxi huaoulai automation equipment Co., Ltd
- Representative: ZhengGuang·Han
- Product/Service: Laser accessories , Sheet metal processing , Hardware accessories , Laser cutting machine , Bending Machine , Laser Cutting Machine Accessories
- Capital (Million US $): 100,0000RMB
- Year Established: 2015
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 1% - 10%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: no
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: Zhongwei international apartment 5-312, Huishan District, Wuxi City, Jiangsu Province, China
- Contact Person: Mr. johan
- Tel: 86-510-83572797
Premium Related Products